![background image](http://html1.mh-extra.com/html/winnebago/journey/journey_operators-manual_987365040.webp)
SECTION 3 –
DRIVING YOUR MOTORHOME
3-14
NOTE: If an override event occurs while the
switch is held in the Tag Dump position,
the switch must be cycled on and off to
clear the override command.
Further Information
See the chassis manual provided in your
InfoCase for more information and precautions
on using this feature.
HAZARD WARNING FLASHERS
The hazard warning flashers provide
additional safety when the vehicle must be
stopped on the side of the roadway and presents a
possible hazard to other motorists. When the
flashers are on, it serves as a warning to other
drivers.
NOTE: Move multi-function lever up or down to
cancel.
Further Information
See the chassis manual in your InfoCase for
instructions on activating, operating, and
canceling hazard warning flashers.
SIGNAL LEVER/HEADLIGHT
HIGH-LOW BEAM
The signal lever controls the turn signals and
headlight high/low beams.
•
Move multi-function lever upward for right
turn signal and downward for left turn signal.
An audible chime will alert you when the
signals are flashing.
•
Pull end of handle toward you to switch
headlight high/low beams.
Further Information
See your chassis manual for further operating
instructions and features.
HEADLIGHT SWITCH
The headlight switch is located on the left side
of the dash.
•
Left Position: All lights off, except daytime
running lights.
•
Middle Position: Parking lights on.
•
Right Position: All lights on.
NOTE: The “Push” dial (for fog lights) are non-
functional.
Hazard Warning Flashers
(Typical View - your coach may differ
depending on model)
• Pull Silver Lever outward to activate Hazard
Flashers.
Turn Signals/High-Low Beams
(Typical View - your coach may differ
depending on model)