7-13
SECTION 7 –
PLUMBING
• Remove Drain Line from the compartment
and position the line in a water collection
source to avoid spilling inside the
motorhome.
• Turn Ice Maker Winterization Drain valve to
the OPEN position.
• After the last batch of ice dispenses, raise the
wire shut-off arm to the OFF position.
• Empty ice bin.
Further Information
Refer to the refrigerator manufacturer’s user
guide provided in your InfoCase for complete
winterizing information.
9.
Drain Optional Appliances.
At this time, if
your motorhome is equipped with an optional
washer/dryer, the waterlines for these
appliances must also be drained.
(See “Winterizing Optional Appliances” at
the end of this section for further
information.)
If not, proceed to the next numbered step.
10.
Connect Air Pressure.
After water has
stopped draining at all faucets and drain
valves, leave faucets open and connect a
“blow-out” plug to the Fresh Water Inlet (city
water connection) in the water service center.
Then use a compressed air hose regulated to
30 psi or less to force air through the system.
A blow-out plug can be purchased at any
Winnebago Industries
®
dealer.
Locate and remove the access panel on
the passenger side interior.
-Typical View
Inside the compartment is the drain line.
-Typical View
The valve is located on the waterline.
Place the end in a water collection
source before draining.
-Typical View
