SECTION 8 –
ENTERTAINMENT
8-2
Further Information
Refer to the manufacturer’s user guide
provided in your InfoCase for complete operating
instructions.
AUDIO/VIDEO SYSTEM BASIC
OPERATION
NOTE: For your convenience, we have also
included a handy, tear-out version of this
“A/V System Basic Operation” guide in
Section 8 of your Operator’s Manual
Supplement.
See your InfoCase for specific operating
guides for audio and video components.
SOUND BAR SYSTEM
–If Equipped
The Sound Bar System operates from 120-volt
AC household current only, so you must have
either the shoreline connected, the generator
running, or the inverter turned on (if equipped).
The TV is connected to the Sound Bar.
TV Sound through the Sound Bar
When watching TV programs (broadcast,
cable, or satellite), the TV normally plays sound
through its own built-in stereo speakers. To
connect TV sound output to the Sound Bar for a
richer sound quality, follow these steps:
•
Turn “ON” the TV and Sound Bar.
•
Select the TV channel you wish to watch.
•
Press the “Source” button on the Sound Bar
remote until the display reads “D.IN”.
•
Turn Sound Bar volume up or down.
Listen to Music stored on a
Bluetooth device
•
Press the “Source” button on the top panel of
the Sound Bar or on the Sound Bar remote
until display reads “BT”.
•
On your Bluetooth device, perform the
pairing operation. A list of devices found will
appear on your device. Select the Sound Bar.
•
Enter the PIN code 0000 (if required).
•
When the devices are paired, the Sound Bar
will display the device name.
•
Turn the Sound Bar volume up or down.
Lounge TV with Sound Bar System
•
Turn on TV and ensure TV source is set to
HDMI by pressing the source or input button
on the TV remote.
•
Turn on the sound bar and set the input to
optical.
•
Volume is controlled by the sound bar remote.
NOTE: TV will operate without using the sound
bar if desired.
Bedroom TV with Sound Bar
System
•
Turn on TV and ensure TV source is set to
HDMI by pressing the source or input button
on the TV remote.
•
Turn on the sound bar and set the input to
optical.
•
Volume is controlled by the sound bar remote.
NOTE: TV will operate without using the sound
bar if desired.
Exterior TV with Sound Bar System
•
Turn on TV and ensure TV source is set to
HDMI by pressing the source or input button
on the TV remote.
•
Turn on the sound bar and set the input to
optical.
•
Volume is controlled by the sound bar remote.
NOTE: TV will operate without using the sound
bar if desired.
Turning TV Speakers On/Off
TV speakers can be turned off to prevent an
echo effect when using an external speaker
(sound bar). Every TV is slightly different, refer
to the TV manufacturer’s user guide provided in
your InfoCase for detailed instructions on turning
TV speakers off.
Further Information
See the manufacturer’s user guide provided in
your InfoCase for complete feature descriptions
and operating instructions.
