5-13
SECTION 5 –
APPLIANCES AND SYSTEMS
1. Press the Power button (left side of touch
panel).
2. Open the drawer, then press the ECO button
on the inside of the drawer and the Lock
button (right side of touch panel) at the same
time until you hear one long beep.
3. Press the Start/Pause button (center of touch
panel) 3 times (the light above the button will
be red).
4. Press the Lock button (right side of touch
panel) to turn the “Closed Drawer” feature on.
The lights on display panel inside of the
drawer will light up.
5. Press the Power button (left on touch panel)
the unit is set.
NOTE: If the power is disconnected and
restored, the drawer will unlock then
lock itself after 30 seconds. It will stay
locked when power is disconnected and
must have power connected to open.
To open the drawer in this mode, you must
press the Start/Pause button.
Further Information
See the dishwasher manufacturer’s user guide
provided in your InfoCase for complete operating
instructions.
DISHWASHER
(Drawer Style)
–If Equipped
Lock Feature
The Dish Drawer must be programmed to the
“Closed Drawer” autolock feature to keep the
drawer locked while driving.
NOTE: If the power to the dishwasher is
disconnected, the drawer will remain
locked.
The dishwasher can be operated by either the
remote control (located inside the InfoCase) or
by using the wash program panel (located inside
the dishwasher).
Basic Dishwasher Operation
1. Press the Wash Program Selector button
repeatedly to select a wash setting. The ECO
Indicator light will illuminate red when an
energy efficient setting has been selected.
2. Press the Start button. Close the drawer to start
the wash cycle.
3. The dishwasher will beep six (6) times when
the wash cycle is complete.
Power
Button
Start/Pause
Button
Lock
Button
Wash Program Panel
(located inside the dishwasher)
-Typical View
• Wash Program
Selector
• Start
• ECO Indicator
Dishwasher Remote Control
-Typical View
Start/Pause
