SECTION 3
DRIVING YOUR MOTOR HOME
3-8
Basic Operating Instructions
Sideview Cameras*– if equipped.
The
optional sideview cameras activate with the
corresponding turn signals and replace the rear
camera view on the monitor until the turn is
completed or the signal lever is canceled
manually.
†
Optional GPS system may not be available on all
models.
Further Information
See the rearview monitor manufacturer’s
complete operating information in your
InfoCase.
ELECTRONIC COMPASS AND
OUTSIDE THERMOMETER
Further Information
See the compass manufacturer’s guide in your
InfoCase for detailed operating instructions,
calibration, specifications and other information.
POWER SUNVISORS
The powered sunvisors are controlled by
switches on the driver and passenger armrest
panels.
•
Press and hold the desired switch to extend or
retract, then release at the desired position.
•
Driver side switches allow the driver full
control of all visors.
•
Passenger side switch controls only the
passenger side visor.
Power
- In STANDBY position the monitor is ‘asleep’ and
will ‘wake up’ when the transmission is shifted into
Reverse.
The ON position activates the monitor for rear viewing
while driving or parked. Key must be on.
Input Camera/Aux -
Press to switch between viewing
Camera(s) or Aux GPS display (optional
†) on monitor.
Night/Day -
Press to adjust contrast and brightness for
nighttime and daytime lighting conditions. After making
adjustments, button is used to switch between settings.
Volume, contrast and brightness are self-explanatory.
•
F/C Button -
Press to switch between
Fahrenheit and Celsius temperature degree
scales.
When display is off, press and hold to check
temperature.
•
Mode Button -
Press to ‘page through’
functions: Compass > Thermometer >
Calibration
