SECTION 8
ENTERTAINMENT
8-2
DVD HOME THEATER SYSTEM
–If Equipped
The available DVD home theater system
operates from 120-volt AC household current
only, so you must have either the shoreline
connected, the generator running, or the inverter
turned on (if equipped).
The TV is connected to the Home Theater
System which plays through theater speakers in
the lounge area of the coach.
Connect Theater Speakers
•
Press the Speaker switch on the
dash to TV position to connect the
theater speakers to the Home
Theater System.
NOTE:The Aux. Battery Disconnect switch must
be On for Theater Sound because the
audio relay is powered by house
batteries. If the Aux Batt switch is off, the
speakers will not emit sound.
Set TV Video Input
•
Turn On both TV and DVD player.
•
Press
TV/VIDEO
or
INPUT
button on the
remote or front of TV
and select the DVD
input channel on the
TV.
Sony: “Video 7”
Sharp: “Video 1”
•
The TV screen will
display the DVD player logo when the correct
input is selected.
Play DVD with Theater Sound
•
Insert DVD into player. DVD will begin to
‘load’ automatically. TV screen will typically
show “
READING
” or “
LOADING
.”
•
The DVD may load directly to the
main title/menu screen or it may
begin to play previews. You may be
able to skip previews if desired by pressing the
chapter ‘advance’ button until you see the
main menu screen.
•
When the main menu
screen appears, use the
arrow buttons on the remote
to select the desired entry or
press the
ENTER
or
PLAY
buttons on the remote (or
‘
Play
’ button on DVD
player) to begin playing the
feature.
•
Volume is adjusted with the DVD remote (or
volume control on DVD player).
TV Sound through Theater Speakers
When watching TV programs (broadcast,
cable or satellite), the TV normally plays sound
through its own built-in stereo speakers. To
connect TV sound output to home theater
speakers for a richer sound quality, follow these
steps:
•
Press Speaker switch on dash to TV position.
•
Turn the TV and DVD player On.
•
Select the TV channel you wish to watch.
•
Press FUNCTION button on DVD player or
remote to set DVD player to “
TV/VCR
”
•
Use the TV Menu button to set TV audio
output to ‘
Variable Audio Output
.’ (See TV
owner’s manual for instructions.) This will
route TV stereo sound output through the
home theater system.
•
Adjust theater speaker master volume to
maximum on the DVD, then control volume
with the TV remote.
RADIO THROUGH THEATER
SPEAKERS
–If Equipped
To Listen to the Dash Radio
through the Theater Speakers:.
•
Press the Speaker selector
switch on the dash to RADIO
position to connect the radio
to the theater sound speakers.
Volume is adjusted with radio
buttons or radio remote.
NOTE: The theater sound
center channel speaker will
not be active in Radio mode.
