SECTION 3 –
DRIVING YOUR MOTOR HOME
3-12
FRONT SERVICE ACCESS
(HOOD)
The Hood Panel can be opened for access to
service items such as the engine oil dipstick, oil
fill, radiator fill, power steering reservoir, and
windshield washer fluid reservoir.
The Hood Latch is located behind the bottom
edge of the Hood Panel near the center of the
grille.
To Open Hood Panel
•
Squeeze or Pull the Hood Latch toward the
Hood Panel to release the latch.
•
Pull the Hood Panel outward slightly and raise
up into open position.
To Close Hood Panel
•
Pull Hood Panel DOWN and swing IN.
•
Press top edge of Hood Panel in firmly with
palms of hands to ensure proper latching.
ENGINE ACCESS – INTERIOR
Front Engine Cover
(Located between cab seats)
NOTE: Take precautions to protect carpet and
interior furnishings when removing
engine cover. The underside of the engine
cover could contain deposits of oil and
fuel or other engine fluids and
substances that could damage fabrics
and interior furnishings.
•
To remove the engine cover,
insert the
supplied hex wrench into the hole (located on
the top center
or
the front edge of the engine
cover, depending on model).
•
Turn the hex wrench to the left (counter-
clockwise) to unlock.
NOTE: On certain models, there may also be
additional screws to remove at the lower
front corners on each side of the engine
cover. See following photo.
Hood Latch
(Squeeze or Pull toward Hood Panel
and raise up into open position)
• Insert hex wrench into the hole located on the
top center of the engine cover (as shown)
or
the front edge of engine cover (depending on
model) to unlock.
-Typical installation shown