Winmate R15IK3S-POC3, User Manual

Page: 51 / 76

51
Chapter 4: INSYDE H20 BIOS Setup
5.3 Using Recovery Wizard to Restore Computer
NOTE:
Before starting the recovery process, make sure to backup all user data. The
data will be lost after the recovery process.
To enable quick one-key recovery procedure:
5. Connect the computer to the power source. Make sure the computer stays plugged in to
power source during the recovery process.
6. Turn on the computer, and when the boot screen shows up, press Tab+ F6 to initiate the
Recovery Wizard.
7. The following screen shows the Recovery Wizard. Click Recovery button to continue.
8. A warning message about data loss will show up. Make sure the data is backed up before
recovery, and click Yes to continue.
9. Wait the recovery process to complete. During the recovery process, a command prompt will
show up to indicate the percent of recovery process complete. The system will restart
automatically after recovery completed.
IMPORTANT:
Before starting the recovery process, remove the PCI/ PCIe card and CFast
card.