Winmate R15IK3S-POC3, User Manual

Page: 41 / 76

41
Chapter 4: INSYDE H20 BIOS Setup
BIOS Setting Description Setting Option Effect
Boot
Performance
Mode Configure Boot
Performance Mode
parameters -Max non-turbo
performance
-Max battery
-Turbo
Performance Select the performance state
that the BIOS will set starting
from reset vector
Intel
SpeedStep (ta) Configure Intel
SpeedStep (ta)
parameters Enabled/
Disabled Allows more than two
frequency ranges to be
supported
Intel Speed
Shift
Technology Configure Intel Speed
Shift Technology
parameters Enabled/
Disabled Enable/ Disable Intel Speed
Shift Technology support.
Enabling will expose the CPP
v2 interface to allow for
hardware controlled P-states
-Turbo Mode Enable or disable
Turbo Mode Enabled/
Disabled Enable/ Disable processor
Turbo Mode (requires
EMTTM enabled too). Auto
means enabled, unless max
turbo ratio is bigger than 16
–
SKL AO W/A
C states Enable or disable
C states Enabled/
Disabled Enable/ Disable CPU Power
Management. Allows COU to
go to C states when it is not
100% utilized
Custom P-
state Table Configure Custom P-
state Table
parameters Enter Enters sub-menu
-Number of P-
states Select the number of
custom P-states. [Number] Set the number of custom P-
states. At least 2 states must
be present