15
Chapter 2: Getting Started
2.7 First-time Operation
To start using the tablet computer for the first time:
Install the battery pack.
Install battery.
Charge the tablet computer.
Power on the tablet computer.
Configure the settings of the tablet computer
Inserting Battery Pack
To insert the standard battery pack into the tablet computer:
1. Disconnect AC adapter and power cord from the Tablet Computer.
2. Turn the Tablet Computer over, back facing up.
3. Insert the battery on the connector-pins side first, and then lower the battery
into the battery compartment. Screw tightly on the battery to make it fully
inserted.
4. Make sure the battery is completely inserted; battery will be flat against the housing
once fully inserted.
Place the tablet (back facing up) and insert the Battery into the battery slot.
Removing the Battery Pack
1. Power off the tablet computer (or turn on sleep mode). Disconnect any cords
connected to the computer.
2. Turn the tablet computer over, back facing up.
3.
Locate the Battery and unscrew it to the “Unlocked” position.
4. Lift the battery out.
