Winmate EAC Mini EACIL67, User Manual

Page: 34 / 72

34
EAC Mini EACIL67 IoT Gateway User Manual
BIOS Setting Description Setting Option Effect
Chipset-SATA
Controller
Configuration
The Chipset SATA controller
supports the 2 black
Internal SATA ports (up to 3
GBb/s supported per port)
Enabled/ Disabled
Enables/ Disables the
Chipset-SATA Controller
SATA Mode
Selection Determines how SATA
controller(s) operate
AHCI Select SATA Mode
SATA Interface
Speed
Select SATA interface
speed, CHV A1 always with
Gen1 selected
Gen1/ Gen2/
Gen3 Select SATA Interface
Speed
Port 0
Enable or Disable SATA
Port
Enabled/ Disabled
Enable/ Disable SATA
Port
SATA Port 0 Hot Plug
Capability Enable or Disable SATA
Port 0 Hot Plug Capability
Enabled/ Disabled
If enabled, SATA port will
be reported as Hot Plug
capable.
Spin Up Device
Configure Spin Up Device
settings
Enabled/ Disabled
If enabled for any of
ports Staggered Spin Up
will be performed and
only the drives which
have this option enabled
will spin up at boot.
Otherwise all drives spen
up at boot.
SATA Device Type
Identify the SATA port is
connected to Hard Disk
Drive or Solid State Drive
Hard Disk Drive/
Solid State Drive SATA Device connected
to HDD or SSD
SATA Port 0 DevSlp
Configure SATA Port 0
DevSlp settings
Enabled/ Disabled
Enable/ Disable SATA
Port 0 DevSlp.
*Board
rework for LP needed
before enable
DITO Configuration Configure DITO settings Enabled/ Disabled
Enable/ Disable DITO
Configuration