23
Winmate E430RM4L Rugged PDA User Guide
1.6.2 Battery Installation
CAUTION
•The lithium battery used in this tablet may swell after being charged/
discharged many times, but there is no problem regarding safety.
•Continued use in such a state may result in the battery getting jammed, so
please stop using the battery, and purchase a new one.
CAUTION
To keep battery health and prevent possible issues from battery over-discharged,
please charge the device built-in back-up battery once every two months.
Inserting the standard Battery Pack into the device:
1.
Disconnect AC adapter and power cord from the device.
2.
Turn the device over, back facing up.
3.
Locate the Battery Lock Latch and push it to the “Unlocked” position.
4.
Locate the Battery Release Slider that is spring-loaded. Pull back and hold.
5.
Insert the battery on the connector-pins side first, and then lower the battery into the battery
compartment. Continue to hold the Battery Release Slider before battery is fully inserted.
6.
Make sure the battery is completely lowered into the compartment before letting go the Battery
Release Slider. Battery will be flat against the housing once fully inserted.
Reinsert the battery by latching the bottom first (1) and then
pushing the battery pack down (2).
CAUTION
Do not insert your fingers into contact hole when inserting the battery.
