Page 7
Winkhaus STV
Oper
ating Manual EA
V 0124653 0505
Subject to technical changes
Winkhaus STV GmbH & Co. KG · Berkeser Str. 6 · D-98617 Meiningen · Germany · www.winkhaus.de · [email protected]
• The manufacturer shall not be held liable for damage caused by use contrary to the
intended purpose of the product.
• For security reasons, the lock has been designed to be used in conjunction with
genuine Winkhaus parts. Using other parts may adversely affect the given properties
of the security lock.
• It must be ensured that the door can be closed without any problems by the key.
• Installation/Repair of electrical equipment requires expertise, thus such work should
only be carried out by an electrician.
• Arbitrary modifications, changes or makeshift repairs are not permitted due to
concerns for safety. You must only use genuine Winkhaus parts for replacements.
• The manufacturer shall only be held liable for security related properties of the
locking system as stipulated within the bounds of statutory regulations, if the
manufacturer himself or another instructed, authorized agent has carried out the
maintenance and service work or made the changes.
• Winkhaus STV shall not be liable for any type of damage caused by inadequate
repair or changes made.
1.6. Abbreviations/Explanations
The following terms and abbreviations are used in this manual:
STV
Security lock
AV2
Automatic locking system
EAV
Electronic automatic locking
system
Handle
Door handle
Grt.
Set
SB FRA Center strike – latch/bolt/
leveling member
M2
with 2 massive hooks
RS
DIN-right-handed
LS
DIN-left-handed
mc
Surface mat chrome-plated
est
stainless steel
gr
gray pulverized
Reader
Reader unit/control unit of the
transponder set
AC
Alternating current
DC
Direct current
NO
Make contact
NC
Break contact
NO-NC
Changer contact
ANT/GND Auxiliary antenna/Ground
UP-socket Flush-type box
LED
Light emitting diode
1. Important information
