manualshive.com logo in svg

Winkhaus STV AV2, Operating Manual, Page: 31 / 40

Share
Download
Winkhaus STV AV2 Operating Manual Download Page 31

Page 31

Winkhaus STV

Oper

ating Manual EA

V 0124653 0505

Subject to technical changes

Winkhaus STV GmbH & Co. KG · Berkeser Str. 6 · D-98617 Meiningen · Germany · www.winkhaus.de · [email protected]

The wireless receiver saves the keys of the wireless hand-held transmitter in the se-
quence entered.
•  To teach-in, press the P1 key of the circuit board of the wireless receiver. 
•  The green LED lights up.
•  Release the P1 key.

ON/OFF mode: 
•  The default setting of the relay of the receiver is “Pulse”.
•  You can program it as an ON/OFF relay for additional applications (specified by the 

respective application).

•  For this purpose, press the P1 key of the receiver until the green LED lights up.
•  Release the key again.
•  Press the P1 key once more.
•  The LED flashes and the relay is switched to the ON/OFF mode.
•  Use the same procedure to get to the pulse mode.
•  Then, the LED will be lit continuously.

Displaying the occupied memory units:
•  Press and hold the P1 key of the receiver until the green LED lights up.
•  Keep the key pressed until the LED goes off.
•  Then release the key immediately.

The display is a binary code: LED green = 1, LED red = 0 

4.4.  Wireless receiver for additional applications 
 

(e.g. garage door control units)

 

NOTICE!

The teaching-in per hand-held transmitter is not possible for this receiver.

Teaching-in via the wireless receiver (item no.: 1231777) 

[1]

„JP1 jumper“

[2]

„P1 key”

[3]

„K4 relay ”

[4]

„red LED”

[5]

„green LED”

4. Operation/Programming

Summary of Contents for AV2









































Reviews:

No comments