WinGD WARTSILA RT-flex58T-E, Maintenance Manual

Page: 16 / 504

RT-flex58T-E
Maintenance
0002 − 1/A1
Table of Contents
2/ 5
Winterthur Gas & Diesel Ltd.
2015-08
Bedplate and Tie Rod Group 1
Bedplate and Thrust Bearing: Checking the Foundation Bolts 1112 − 1/A1 . . . . . . . . . . . . . . . . .
Main Bearing
− Loosening and Tensioning of Elastic Studs 1132 − 1/A1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
− Removal and Fitting of a Main Bearing 1132 − 2/A1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Thrust Bearing
− Checking the Axial Clearance 1203 − 1/A1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
− Removal and Fitting the Thrust Bearing Pads 1224 − 1/A1 . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Engine Stays with Friction Shims: Checking the Pre-tension 1715 − 1/A1 . . . . . . . . . . . . . . . . . .
Tie Rod: Checking the Pre-tension and Tensioning the Tie Rods 1903 − 1/A2 . . . . . . . . . . . . . .
Cylinder Liner and Cylinder Cover Group 2
Cylinder Liner
− Measuring Bore Wear 2124 − 1/A1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
− Removal and Fitting 2124 − 2/A1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
− Removing the Wear Ridge, Re-dressing Lubricating Grooves
and Scavenge Ports 2124 − 3/A1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Lubricating Quill with Pulse Jet Lubrication: Removal and Fitting 2138 − 1/A2 . . . . . . . . . . . . . .
Piston Rod Gland: Dismantling and Assembling, Measuring the Wear 2303 − 1/A1 . . . . . . . . .
Cylinder Cover
− Removal and Fitting of Cylinder Cover and Water Guide Jacket 2708 − 1/A1 . . . . . . . . . . . .
− Loosening and Tensioning of Cylinder Cover Elastic Studs 2708 − 2/A1 . . . . . . . . . . . . . . . .
− Machining of Sealing Face for Injection Valve 2708 − 3/A1 . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Injection Valve with FAST: Checking, Dismantling, Assembling and Adjusting 2722 − 1/A2 . . .
Starting Air Valve: Removal, Fitting and Dismantling, Grinding-in and Assembling 2728 − 1/A1
Relief Valve for Cylinder Cover 2745 − 1/A1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Exhaust Valve
− Removal and Fitting of Exhaust Valve, Replacing of Elastic Studs 2751 − 1/A1 . . . . . . . . . .
− Dismantling and Assembling 2751 − 2/A1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
− Replacing and Grinding the Valve Seat 2751 − 3/A1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
− Grinding the Seating Surface on the Valve Head 2751 − 4/A1 . . . . . . . . . . . . . . . . . . . . . . . . .