Installation Procedure
WiN7200 Installation and Setup Guide
18
3.4.2
Cover Console Port
The
Console
port is only used for maintenance operations performed by authorized service
personnel and should be closed in normal conditions.
Secure the
Console
port with both of the (supplied) screws to the port panel. See figure below.
Note: See Appendix C – Console C for Console cable pin out.
3.4.3
Assemble PoE Connector
The DC/Ethernet connector that provides the PoE connection must be assembled as follows:
1. Insert the cap in to the DC/Ethernet port cover, with the as shown below.
2. Insert the PoE cable (not supplied) through the cap and connect it to the supplied J45
connector.
3. Snap the J45 connector into the
DC/Ethernet
opening.
