Web Operation
Note:
To access the Winegard ConnecT software Winegard recommends
web browsers Microsoft Edge, Firefox, Safari, and Google Chrome.
Warning: For first time users -
On the initial setup, your Gateway 5G may
have to reconfigure the modem. If this occurs, expect an additional 1-2
minutes of delay before the Gateway 5G can be used.
DO NOT CLICK THE BACK BUTTON
on your web browser when navigating
through this software.
Step 1 -
Turn the Gateway 5G power
switch ON. Turn on the WiFi enabled
device(s) that you want to connect and
scan for wireless networks. It may take
a few minutes for the Winegard network
to appear.
Step 2 -
The label located on the front of
this manual lists the unique default SSID
and password. Select this WiFi network
from the list and enter the correct
password.
Step 3 -
Once connected, open your
device’s Internet browser and type
10.11.12.1 into the address bar and press
Enter. This will take you to the Admin
Login page. Login using the following:
USERNAME: admin
PASSWORD:admin
Note:
It is recommended to set your
device(s) to automatically reconnect
with the Winegard Gateway 5G
8
