
26
No.
PROBLEMS
POSSIBLE PROBLEMS/ CAUSE / MEASURE
9
The door will not close properly.
The cellar is not level.
The door was reversed and not properly installed.
The gasket is dirty.
The shelves are out of position.
10 The door is not at level with the cabinet
Adjust the legs at the front of the cellar until the door is at
level with the cabinet.
11 The door is opening by itself
It is probably because the guide is not equal to the « L »
piece.
Make sure the cellar is at level.
12 A shelf is not at level
Make sure the guide are well engage
13 After inserting the key the cellar still lock
The handle(lock) is not notch or the nut is not equal to the « L
» piece.
Make sure the door is at level with the cabinet
14 There is water on the cellar floor
Make sure the drain is in the evaporation tray in the back of
the cellar. If so, during humid temperature, you might have to
wipe off the excess in the tray with a sponge
15 Accumulation of water inside the cellar?
This phenomena might occurs in summer, reason of humidity.
Verify if the door seal is hermetic.
It is recommended during humid temperature to wipe off the
excess of water inside the cellar.
16 Frost on the evaporator?
It is normal when the water vapor freeze. However when the
cooling cycle is finish, the ice will become water.
17
Steaming/humidity between the thermal
windows
During summer with humid temperature, this situation might
occurs.
18
The display window is shown with “HH”
or “LL” instead of a digital figure,
and/or with continuous buzz sound.
The temperature probe is out of order.
Summary of Contents for WC194FGBK
Page 5: ...4 WC194FGBK DESSIN D INSTALLATION...
Page 19: ...18 STRUCTURE AND INSTALLATION STRUCTURE WC194SSTS WC194FGBK...
Page 28: ...27...