Wine Cell'R WC194FGBK, Instruction Manual, Page: 20 / 28

19
INSTALLATION DRAWING
PREPARATION BEFORE OPERATING
UNPACKING AND CLEANING THE CELLAR
• Remove the exterior and interior packing materials.
• Let the appliance stand upright for approximately
24 hours before connecting it to the power source, which
helps to reduce the possibility of a cooling-system malfunction from handling during transportation.
• Use a soft cloth to clean the interior surface with water.
• Install the door handle provided with the appliance by following these steps:
-
Remove the gasket on the internal
door to expose the two screw holes
.
-
Install the handle with the
screws and washers provided.
-
Restore the gasket.
LOCK & UNLOCK THE DOOR
•
Insert the key into the lock and turn it counter-clockwise to unlock the door. To lock it,
please follow the reversed operation. Please save the key well.
Flat Washer
Screw
Screw
Gasket
Handle
Door Frame