Wine Cell'R Toscane WC-120inox, User Manual, Page: 8 / 22

6
• the temperature pre-set by the manufacturer is 54°F (12°C). When you connect
to power, the indicator shows the temperature of 54°F (12°C). the adjustable
temperature range is 48°F - 65°F (9°C -18°C). if you wish to adjust 54°F (12°C),
you may press the button “+”to increase or “-” to decrease until you reach the
desired temperature.
• When the internal temperature is too low the led indicator will display “ll”. When
the temperature is too high it will display “HH”. the “er” displays when there has
been a power disruption. turn your unit off immediately if your unit displays “er” and
call for technical assistance.
• When the power is first turned on or when the power comes on again after an
extended power outage, the wine cellar may run continuously for several hours in
order to cool the entire cabinet to the normal operating temperature. When the
interior temperature has stabilized, the wine cellar will enter the automatic control
mode.
• depending on location and usage, the wine cellar compressor may run more
continuously on hot days, and run relatively less on cold days.
• if these instructions are followed, the compressor unit will offer worry -free
operation.
7. PaCKaGinG and transPortation
• When packing the wine cooler for transport, make certain that all the parts are
placed in the original position they were when you first bought it.
• do not lay the wine cellar on its side. the angle between the cabinet and the ground
should not be less than 45°.
• do not handle or lift the wine cellar by its door.
• Collision and violent vibrations must be avoided during moving and transportation.
8. Cautions
• When using the wine cellar for the first time or after it has been moved, wait for 24
hours before plugging it in to avoid damage to the compressor.
• after removing the power plug from the wall outlet, wait 5 minutes before plugging
wine cellar in again to avoid damage to the compressor.
• if there seems to be a temperature sensor failure, please reset the unit: turn it on
for 5 minutes, turn it off for 20 minutes and turn it back on.
• make certain the wine cellar is plugged into an approved circuit or outlet. to prevent
accidents, do not use in an overloaded circuit or outlet. the electrical outlet should
have proper ground fault protection.
• do not use this wine cellar if the aC wall outlet does not seem to conform to
applicable local electrical code.