Wine Cell'R Toscane WC-120inox, User Manual, Page: 6 / 22

4
5. unscrew the six screws of the right bottom door hinge and the left bottom bracket.
the screws are underneath the wine cellar.
6. use the provided extra hinge and bracket (these are in the plastic bag along with
the instruction manual) and screw the right bottom bracket and left bottom door
hinge. Put the support wheel on the extra right bottom bracket. the extra hinge
comes with two white bushings. these must be inserted underneath the bottom
and top right side of the door. to insert the top white bushing on the top right side
of the door, you must remove the little grey plastic cover at this same location.
this little cover will be used to cover the remaining top right side of the door.
install the support wheel on the right bottom bracket.
7. to remove the door handle and fix it on the right of the door: please do the
following:
• Pull out with your fingers the door plastic isolating gasket behind the door
handle. You should be able to see four screws (two screws are on the upper
part of the door and other two screws are on the lower part of the door).
• unscrew the four door handle screws.
• remove the handle, and fix it on the other side of the door after having
removed the four grey little plastic covers at the front top and bottom of the
door. screw the door handle with the four screws on the other side of door.
• Put the plastic covers on the remaining holes on the top and bottom right
of the door.
8. reinstall the door gently on the bottom hinge. make sure the white bushing is
inserted underneath the left side of the door.
9. install the top hinge on the other side. make sure the white bushing is inserted
on top to the left side of the door. screw on tightly and make sure the door is well
aligned with the cabinet.
10. Put back in place the top hinge cover. screw back the front grill.
11. You now have installed the door on the right side.
IMPORTANT: When finished reversing the door, it is IMPORTANT not to power up the
unit for 24 hours. This will allow the coolants to settle in the compressor.