Windsor Saber Cutter 10052360, Operator Instructions Manual, Page: 15 / 92

CONTROLS
CUTTER 24V 86036830 06/20/07
3-8
13. BATTERY CHARGE LEVEL INDICATOR
Indicates the charge level of the batteries.
The meter display is divided into 10 vertical
bars. Bar illuminated on the far right indicate
full charge. Bars flashing near the left side
indicate the batteries should be recharged.
Further operation of the machine could
damage the machine or the batteries.
When the machine is left overnight with less
than a full charge, the display may initially
indicate a full charge. It will also indicate a full
charge if the batteries are disconnected, then
reconnected. After a few minutes of operation
the meter will give the correct charge level.
14. PARKING BRAKE (OPTIONAL)
Locks front wheels to prevent unintentional
movement.
To set parking brake, push down to lock notch.
To release parking brake, push down and over
out of the lock down notch.
15. HOUR METER (OPTIONAL)
Records the number of hours the machine has
been in operation. This information is useful
in determining when to service the machine.
16.
BRUSH PRESSURE INDICATOR
The brush pressure indicator corresponds to
the amp draw of the scrub brush motors to tell
how hard the motors are working. The green
zone indicates medium or proper operating
brush pressure. The red zone indicates heavy
or excessive brush pressure. Operating in the
red zone may cause the brush circuit breakers
to trip.