28
Local input
The MotorController has two programmable inputs and one input for wind/rain. If further inputs are needed, the input card WCA
8KI (requires the motor line card) can be added. This card has ten local inputs.
The touch screen has an overview of the local inputs.
12.4.1 Numbering of local inputs
All local inputs are numbered.
The number of the input depends on its location on a card - see overview below.
MotorController with input card
12.4.2 Local input - configuration
If component are installed in one or more inputs, these inputs are to be configured.
Which item to be configured depends on the type of input
– see description below.
Local input - configuration
Overview
’Local input’
Example of overview ’Local input’ with connected input card
(WCA 3KI)
“S1 Close” and “S1 Open” are the two buttons on the board.
Configuration of local input X3 and X4
Input X3 and X4 on WCA 3CP and X1-X10 on WCA 8KI (binary)
If local inputs are connected on the card/cards WCA 3CP and/or
WCA 8KI, it/they shall be configured in:
1.
Input type: informs the
type of the input “Binary) (not to be
configured)
2.
Control motor groups
2.1
Function in controlled motor groups
2.2
Short output function
The appendix contains all the items that can be configured - see
appendix for detailed explanation.
