CHECKING REMOTE RAINFALL DATA
Th e remote rainfall information line is located on the
top line of the main unit’s display. Th e rain icon “ ” is
located to the left of the rainfall reading and indicates
the reception status from the remote rain gauge. Th ere
are three types of reception status that may be displayed:
Press and hold the MODE button on the front panel to
display the rainfall reading in inches or mm.
RAINFALL HISTORY
Th e rainfall history records will be automatically stored
in the memory of the main unit. Th ere are three histori-
cal records that may be displayed—the past hour, past
day, and past week.
• To display any of available rainfall history reading,
use any button on the front panel except the ALARM
button. Th e display sequence is: LAST HOUR, LAST
24 HOURS, and LAST 7 DAYS.
• To clear the memory, press and hold MEMORY button
on the front panel for two seconds and all previously
stored readings will be erased (all the historical records
will display a default reading 0.00).
Th e Unit is in searching mode
Rainfall readings are
securely registered
No signal
MAXIMUM AND MINIMUM TEMPERATURE
Th e maximum and minimum record of the indoor and
remote temperatures will be automatically stored in the
memory of the main unit.
• To display the minimum, maximum, or the current
reading, press MEMORY button on the back panel.
• To clear the memory, press and hold MEMORY button
on the back for two seconds and all previously stored
readings will be erased.
LOST COMMUNICATION
If the main unit display line for the remote temperature
sensor reading goes blank, press and hold the back
DOWN ( ) button for 2 seconds to begin a new signal
search. If the signal still isn’t received, please make sure
that:
• Th e remote temperature sensor is in its proper loca-
tion.
• Th e distance between main unit and remote tempera-
ture sensor is not over 100 feet (30 meters).
• Th e path between units is clear of obstacles. Shorten
the distance if necessary.
• Fresh batteries are installed correctly in both remote
temperature sensor and main unit.
If there is no reception, please perform the following
steps:
• Bring the main unit and remote temperature sensor
close together.
• Remove four (4) small screws from the back of the
17
18
