background image

INTRODUCTION

Th ank you for selecting the Wind & Weather Wireless 

Rain and Temperature Monitor. Th is device monitors 

and displays rainfall data along with the indoor/out-

door temperature from up to three remote locations. 

In this package you will fi nd:

• One main unit (receiver)

• One remote rain gauge (transmitter)

• One remote temperature sensor (transmitter)

Please keep this manual handy as you use your new 

item. It contains practical step-by-step instructions, 

as well as technical specifi cations and precautions you 

should know.

PRODUCT OVERVIEW

MAIN UNIT—FEATURES

•  Wireless transmission of the rainfall data from the 

remote rain gauge to the main unit up to 100 feet (30 

meters) away

•  Wireless transmission of the temperature from the 

remote temperature sensor to the main unit up to 100 

feet (30 meters) away

• Rainfall may be displayed in inches or mm

• Programmable Rain Alarm

• 7 days of rain collection history

• Built-in rain gauge installation level

• Indoor and remote temperature display

• Min/Max Memory for indoor/outdoor temperature

• Hourly, daily and weekly rainfall history

• Monitors temperature in up to 3 remote locations

• Quartz clock with calendar

• Programmable Time Zones

•  Day of the week in English, German, French, Spanish 

or Italian

• Dual crescendo alarm with snooze

• Programmable Ice Warning Alarm

• Wall mount or desktop option

• Low battery indicator

• LED backlight

3

4

Summary of Contents for RG1736















Reviews: