Figure 39
13.WIFI Setup (Connect your Device to the
Console’s
WIFI)
When you first power up(AC) the console, or press and hold the
MIN/MAX/-
button for three seconds in
normal mode, the console icon(behind the Outdoor humidity))
will flash to signify that it has
entered WAP (wireless access point) mode, and is ready to enter for WIFI settings.
You can use your desktop, laptop, tablet, or smart phone to connect to the
console’s
WIFI. The
console’s
network name begins with WeatherHome, followed by a unique code.
Note that when the console programming is complete, you will resume your default WIFI connection.
Note that you cannot connect two or more devices at the same time when WAP mode.
13.1: Example 1:
Connect to the console WIFI server with a PC.
Choose WIFI network settings from Windows (or search
“Change
Wi-Fi
Settings”
from Windows) and
Connect to the WeatherHome------ WIFI network, as shown in Figure 40 (your WIFI network name may be
slightly different, but will always begin with WeatherHome -).
Figure 40
13.2: Example 2.
Connect to the console WIFI server with a Mac.
