3.
Change Hour.
press the
SET(MODE)
key again to set the hour. Press the [+] key or
[-]
key to adjust the
hour up or down. Note the PM icon is present during afternoon hours.
4.
Change Minute.
Press the
SET(MODE)
key again to set the minute. Press the [+] key or [
-
] key to adjust
the minute up or down.
5.
Date Format (default: MM-DD): Press
the
SET(MODE)
key again to enter the day/month format mode.
Press the [+] key to switch between MM-DD-YY, DD-MM-YY.
6.
Change Month.
Press the
SET(MODE)
key again to set the calendar month. Press the [+] key or [
-
] key
to adjust the calendar month.
7.
Change Day.
Press the
SET(MODE)
key again to set the calendar day. Press the [+] key or [
-
] key to
adjust the calendar day.
8.
Change Year. Press
the
SET(MODE)
key again to set the calendar year. Press the [+] key or [
-
] key to
adjust the calendar year.
9.
Max/Min Clearing (default: ON)
. Press the
SET(MODE)
key again to set the max/min clearing mode
(CLR). The Max/Min can be programmed to clear daily (at midnight) or manually. Press the [+] key or [
-
] key to switch between
“Clears
24h”
and Clears Manually.
10.
Temperature Units of Measure (default:
°C
):
. Press the
SET(MODE)
key again to change the
temperature units of measure (the
UNITSET
icon will be displayed). Press the [+] key or [
-
] key to switch
between °F and °C units of measure.
11.
Wind Speed Units of Measure (default: m/s)
. Press the
SET(MODE)
key again to change the wind
speed units of measure. Press the [+] key or [
-
] key to toggle the wind speed units between m/s, km/h,
mph, knots or bft.
12.
Rainfall Units of Measure (default: mm)
. Press the
SET(MODE)
key again to change the Rainfall units of
measure. Press [+] key or [
-
] key to toggle the rainfall units between mm and inch.
13.
Barometric Pressure Display Units (default: hPa)
. Press the
SET(MODE)
key again to change the
pressure units of measure.
Press the [+] key or [
-
] key to toggle the pressure units between mmhg, inHg or hPa.
14.
Pressure Threshold Setting (default level 2).
Press the
SET(MODE)
key again to change the pressure
threshold. Press the [+] key or [
-
] key to change pressure threshold 2 mbar/hour to 4 mbar/hour.
(For detailed information of this part please refer to 15.5)
15.
Weather Icons Setting (default: partly cloudy).
Press the
SET(MODE)
key again to change the initial
weather icon. Press the [+] key or [
-
] key to select the initial weather icon of Sunny, Cloudy, Partly
Cloudy or Rainy. (For detailed information of this part please refer to 15.1 and 15.2)
16.
Sunlight Display Units (default: W/
㎡
)
. Press the
SET(MODE)
key again to change the sunlight units of
measure. Press the [+] key or [
-
] key to toggle the sunlight units between,
W/
㎡
, fc
or lux.
8.
Location division. (default: Northern Hemisphere).
Press the
SET(MODE)
key again to change the
location division. Press the [+] key or [
-
] key to toggle the sunlight units Northern Hemisphere (NOR) or
Southern Hemisphere (SOU).
(
refer to 5.0 Final Installation of Integrated outdoor transmitter
)
