can moisten slightly with spirit. The whole document area can be cleaned
in the same way. You can use a brush or cotton bud to reach inaccessible
places.
Clean the document sensor housing and the reflector opposite it using a
clean cloth without cleaning solution.
Cleaning the transport axes of the print head
To avoid a slow operation of the print head carrier, from time to time you
should clean the transport axes while they are mounted using a soft,
clean, non-fluffy cloth or a soft brush.
Never use a cleaning fluid such as spirit, since this impairs the
bearing’s own lubrication. After cleaning the transport axes, do
not grease or oil them.
Transport axis
Drive axis
Document sensor housing
The BEETLE printer
The BEETLE components
GB - 46
