BIOS Setup Information
WEB-6681 SERIES
【
R1.0
】
User’s Manual
4-16
This option specifies the power conserving state that the VESA VGA video
subsystem enters after the specified period of display inactivity has expired.
Hard Disk Power Down Mode
This option specifies the power management state that the HDD enters after
the specified period of hard drive inactivity has expired. It is the same as video
power control. If user chooses “Stand By” or “Suspend”, it will depend on period of
parameter “Stand By Time out” or “Suspend Time out”.
Stand by Time out (Minute)
This option specifies the length of the period of system inactivity while the
computer is in Full-On power state before the computer is placed in Standby mode.
When this length of time expires, the computer enters Standby Timeout state. In
Standby mode, some power use is curtailed.
Suspend Time out (Minute)
This option is the same as Stand by Time out function. These two features
will be Enabled to monitor power of sub-items “Display Activity”, “Serial port”,
“Parallel Port”, “Floppy”, “Pri-HDD”, and “Sec-HDD” independently. It is also
used to control CPU throttle running function. All of sub-items will be ineffective
in selection of disabling “Stand by Time out” or “Suspend Time out” even if it can
be choose by user in BIOS setup menu.