Page 4 of 4
006001 Rev. I
05.02.18 NCG
GENERAL CARE & CLEANING:
Periodically inspect tightness of all screws, bolts, and nuts.
Winco furnishings are built to provide durable reliable service when properly cared for. In general, all our products
should be 1) Cleaned 2) Rinsed 3) Allowed to air dry. It is important to note that disinfecting a product is not the
same as cleaning the product. Disinfectants alone will not provide adequate cleaning, they do not have grease or
oil cutting properties to remove grime or hair and skin oils. Over time, the appearance and feel and performance of
your upholstery may diminish if not cleaned properly
CLEANING:
Remove grime, hair and body oils; Your furnishings should be cleaned with mild soap & water solution and a damp
cloth on a regular basis. Avoid harsh detergents that could damage the finish of your product. If the furnishing is
disinfected with bleach, it MUST be wiped off using only clean water on a damp cloth and then be allowed to air
dry. Failure to rinse with clean water can result in a build-up of residues over time that can damage your product.
