Page 2 of 4
PANEL REPLACEMENT
6.
To replace Vinyl Panels, grasp Screen Rod; Screen Rod is spring-loaded and can be moved toward end with
spring. Push & pull the Screen Rod to determine which way will compress the spring and allow removal of the
Screen Rod.
7.
Re-install the Screen Rod by reversing the above procedure.
8.
Periodically check all fasteners for tightness. To clean Vinyl Panels use only mild liquid soap and water.
Wrinkles in Vinyl –
Storage and shipping causes wrinkles of the vinyl of your Winco Screen; This is normal. Please
allow 1-2 weeks at room temperature (approx. 70+ degrees) to allow for vinyl to return to original appearance.
3130 Model
TO PREVENT RISK OF INJURY
NEVER stand or ride on screen legs.
Do not over tighten nuts and bolts. Periodically recheck all fasteners for tightness.
Items Included with Screen:
Qty.
(1)
Vinyl Panel
3
(2)
Insert, Screen Rod Plastic
12
(3)
Rod Spring
6
(4)
Screen Rod
6
(5)
¼-20 Lock Nut
4
(6)
¼-20 x 1-½” Machine Screw
4
(7)
Double Leg
2
(8)
Caster Insert
4
(9)
Caster, 2”
4
NOT SHOWN: Crutch Tip, 1” gray w/ washer
4
(Available with 3130 Model Only)