16
60706-237/G
applicable codes. The electrician will move the critical
circuits to be powered during the outage to the
emergency panel. Keep in mind only a limited
amount of amperage is available from the generator
set. Some circuit breakers may still have to be turned
off to prevent an overload on the generator during
the initial start up. See the nameplate on your
generator for the amperage capabilities of your unit.
CAUTION: EQUIPMENT DAMAGE
Failure to properly limit and balance the load applied to
the generator will cause the generator to produce low
voltage and may damage the engine generator set. It
may also cause severe damage to the loads connected
to the generator at that time. Improper loading of the
generator set constitutes abuse and will not be covered
by warranty.