XP5 Pro Chapter Five Pag e 3 of 7
2. Using a phillips screwdriver, undo the screw holding the cover in place.
3. Carefully lift the cover and set and the screw aside.
4. If you are replacing an existing SIMM, carefully lift the existing module straight out of the
socket. [XP5 Pro 5.3]
5. Place the new SIMM into the socket by lining up the connector on the bottom of the module
with the socket and then pressing the module gently into place.
6. Make sure the module is properly seated.
7. Replace the cover.
8. Boot the system. The additional RAM should be detected automatically. You might be taken to
the Setup program to complete the setup.
