20
Watching TV
Pressing
CH
∧
or
CH
∨
on the right panel of the TV
Pressing the number buttons on the remote control
To select a 1-digit channel, press the digit.
To select a 2-digit channel, press the first digit and then the second digit within 3
seconds.
To select a 3-digit channel, press the
100
button, then press the second and third digits
within 3 seconds for each digit.
Returning to the Previous Channel
You can recall your previously viewed channel by pressing the
R
button on the remote control. It
also allows you to jump back and forth between the current and previous channels.
Adjusting Volume
You can adjust the volume in two ways:
Pressing
VOL
+
/
X
or
VOL
−
/
W
on the remote control
Pressing
VOL
∧
or
VOL
∨
on the right panel of the TV
To mute the sound, press the
MUTE
button on the remote control. To end the mute, press the same
button again.
Selecting Mono/Stereo/SAP Mode
Your LCD TV can receive and decode alternative audio other than the main audio stream for the
program. This feature is called Multi-channel Television Sound (MTS). This LCD TV with
MTS can receive mono sound, stereo sound and Secondary Audio Programs (SAP). The
available modes are:
Mono
For mono reception. Selecting this mode may help reduce noise or dropouts during weak
stereo broadcasts.
Stereo
For two channel audio reception when viewing a program broadcasted in stereo.
Main
For the normal program soundtrack.
SAP
For Second Audio Programming (SAP). Used for bilingual audio (available only if the
current TV broadcast supports SAP).
You can use the remote control or OSD to switch between modes.
Using the Remote Control
Press the
SOUND
button on the remote control.
If the current TV broadcast supports SAP, pressing the button cycles between
SAP
and
Main
.
If the current TV broadcast does not support SAP, pressing the button cycles between
Mono
,
Stereo
, and
Main
.
