manualshive.com logo in svg

Winbook 32MO, User Manual

Share
Download
Winbook 32MO User Manual Download Page 16

8 

Quick Setup 

1.4  Powering the TV On and Off 

NOTE: 

Before using the LCD TV for the first time, remember to remove the plastic film that protects the 

panel during transport. 

 

Main Power Switch 

When using the LCD TV for the first time, make sure that the main power switch located on the 
rear of the LCD TV is set to the on ( 

I 

) position. The power indicator on front of the LCD TV will 

illuminate orange, indicating that the TV has power and is currently in standby mode. 

 

Once the master power switch has been engaged, TV power can be turned on and off using the 
power buttons located on the right side panel of the TV or the remote control. 

Power Button 

To turn the TV on, press the 

POWER 

button located on the right side panel of the TV or the power 

button on the remote control. The power indicator on front of the LCD TV lights green to indicate 
that the TV is on. 

To turn the TV off, press the 

POWER 

button located on the right side panel of the TV or the power 

button on the remote control. The power indicator on front of the LCD TV lights orange to 
indicate that the TV is in off (standby) mode. 

Summary of Contents for 32MO














































































Reviews:

No comments

Brands by name

Popular brands

Load more brands