cores. If a BNC cable is going to be used, use only a shielded BNC (5) cable. Also, The
Federal Communications Commission warns the user that any unauthorized changes or
modifications to the unit if not expressly approved by the party responsible for
compliance could void the user's authority of operating the equipment.
4. General Safety Precautions
The equipment should be installed near the wall socket, which should always be easily
accessible. If any faults occur with the equipment, disconnect the power supply cord from
the unit first.
(1) Environment
Place the monitor on a flat and level surface.
Place the monitor in a well-ventilated area.
Keep the monitor away from:
Rain or water
Excessive heat, cold or humidity
Areas exposed to direct sunlight
Dusty surroundings
Equipment that generates strong magnetic fields
(2) Precautions
Sit at least 18" from the TFT LCD Monitor.
Do not apply pressure to the screen. The LCD screen is delicate.
Do not touch the screen directly with fingers, which may damage the screen, and oil
from skin is difficult to clean.
Do not place heavy objects on the power cord, video audio cables, or on the LCD.
Never remove the rear cover. The display unit contains high-voltage parts. You may
suffer from electric shock if you touch these parts.
Always handle your LCD with care when moving it.
(3) Cleaning the TFT LCD Monitor:
Gently wipe the screen with a clean camel hair lens brush, or a soft, clean, lint-free
cloth. This removes dust and other particles which may scratch the screen.
Do not apply excessive pressure to the screen surface because this may damage the
LCD.
Do not pour or spray any liquid to the screen or case of the LCD monitor.
Page 3
