WilTec 61950, Operation Manual

Page: 8 / 19

© by WilTec Wildanger Technik GmbH Item 61950 Page 8
http://www.WilTec.de
http://www.aoyue.eu 05 2021 -1
http://www.teichtip.de
№.
Name
№
Name
1 Sawing table 14 Stop rail
2 Table insert 15 Parallel stop
3 Saw blade 16 Legs
4 Saw blade guard 16a Rubber foot
5 Extractor adapter 16b Support frame
6 Riving knife 17 Long crossbar
7 Cross stop 18 Short middle bar
8 Table width extension 19 Hexagonal screw
9 Push stick 20 Hexagonal screw nut
10 Base frame 21 Cross stop
11 On/off switch 21a Long struts
11a Overload protection switch 21b Longitudinal struts
12 Hand wheel 22a Ring wrench 10/21 mm
13 Adjusting and locking grip 22b Ring wrench 10/13 mm
Items supplied
Please check that the article is complete as specified in the scope of delivery. If parts are missing, please
contact our service centre or the sales outlet where you made your purchase at the latest within 5 work-
ing days after purchasing the product and upon presentation of a valid bill of purchase.
•
Open the packaging and take out the device with care.
•
Remove the packaging material and any packaging and/or transportation braces (if available).
•
Check to see if all items are supplied.
•
Inspect the device and accessories for transport damage.