give it to someone else. The device designed for use in agriculture, forestry and horticulture, must al-
ways be used in accordance with the manufacturer’s instructions, which you will find in these operat-
ing instructions.
Improper use or modification of the product can result in damage to the device
and its surroundings as well as very serious injuries for which the manufacturer cannot be
held liable.
Safety precautions
General safety precautions
Read the instructions carefully before use and familiarize yourself with the controls and the
proper use of the device.
This device is not intended for use by children or adolescents, or by persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge.
Local occupational health and safety regulations to avoid noise pollution can restrict the use of
the device. You should therefore observe the prescribed rest periods.
Keep pets and other people, especially children, away from the work area to avoid distractions
and endanger bystanders. The user is responsible for the people in his work area and for their
property.
Bystanders must keep a safe distance of 15 m while the device is in use.
Major repairs may only be carried out by specialists.
Safety of preparation
Observe the following information when handling fuels, as they are highly flammable.
◦
Only store fuel in the containers provided for it.
◦
Only refuel the device outdoors, do not smoke near the device, and keep it away from
other sources of heat and ignition.
◦
Before each use, check the fuel level and make sure that there is enough fuel. If neces-
sary, add fuel before starting the engine.
◦
Never remove the cover of the fuel tank when the engine is running or the device is still
hot.
◦
With gasoline spilled do not operate the engine under any circumstances. Move the
device away from the area and avoid it until the highly flammable gasoline fumes have
dissipated.
◦
Check the tank cap and the other sealing caps regularly to ensure that they are intact. Do
not use the product if any of the caps are damaged or worn; in this case replace them first.
◦
The multi-function tool is equipped with a four-stroke engine and therefore requires lubric-
ating oil before use.
Visually inspect the device before each use and do not use with parts worn or damaged. Re-
place these parts only as a set and only use identical spare parts of the same quality that have
been approved by the manufacturer.
Do not wear large or loose clothing or jewellery. These can get caught in the starter or other
moving parts.
Make sure that the ventilation openings are not covered or blocked. Under no circumstances
you should insert objects into it.
If the device is used in heat, at high altitudes or in high humidity, the power must be reduced
in order to ensure that the device functions properly and has a long service life.
Safety of operation
Never use the device in closed rooms or with insufficient ventilation. The running engine emits
carbon monoxide, which can cause serious poisoning.
Keep the machine free from oil, dirt and other contaminants. Do not clean it with the engine
running and wait until it has cooled down completely after use. We recommend a damp cloth
for cleaning.
Only set up the device on stable and level surfaces from which it cannot fall.
Make sure that both muffler and air filter are working properly as these parts act as flame re-
© by WilTec Wildanger Technik GmbH
Item 61494
Page 5
http://www.WilTec.de
http://www.aoyue.eu
03 2021
-1