background image

11

12

Contact Wilson Electronics Customer Support Team with any questions at 866-839-9361   

or email: [email protected].    Mon.- Fri. Hours: 7 am to 6 pm MST.

About Wilson Electronics

Wilson Electronics, LLC has been a leader in the wireless communications industry 

for over 40 years . The company designs and manufactures Signal Boosters, 

antennas and related components that significantly improve cellular telephone signal 

reception and transmission in a wide variety of applications, mobile (marine, RV, 

vehicles) and in-building (home, office, machine to machine) .
With extensive experience in antenna and Signal Booster research and design, the 

company’s engineering team uses a state-of-the-art testing laboratory, including 

an anechoic chamber and network analyzers, to fine-tune antenna designs and 

performance . For its Signal Boosters, Wilson Electronics uses a double electrically 

shielded RF enclosure and cell tower simulators for compliance testing .
Wilson Electronics Signal Boosters feature patented SmarTech   

®

 that enables them 

to automatically adjust their power based on cell tower requirements . By detecting 

and preventing oscillation (feedback), signal overload and interference with other 

users, these SmarTech   

®

 Signal Boosters improve network cell phone areas without 

compromising carrier systems .
All products are engineered and assembled in the company’s 100,000 square-foot 

headquarters in St . George, Utah . Wilson Electronics has product dealers in all 50 

states as well as in countries around the world .

Summary of Contents for PRO 70 PLUS SELECT





















Reviews: