Installation
en
Installation and operating instructions Wilo-Yonos MAXO-Z
9
Fig. 7:
Insert pump
2. Insert the pump in the pipe together with 2 suitable
flat gaskets in such a way that the flange can be
screwed to the pump inlet and outlet. The arrow on the
pump housing must point in the direction of flow.
Fig. 8:
Pump installation
3. Screw together flange with suitable screws and the
supplied washers. Observe aforementioned tightening
torques!
Fig. 9:
Opening shut-off devices
4. Open the shut-off devices in front of and behind the
pump.
5. Check impermeability.
5.7.2
Install threaded pipe union pump
WARNING
Hot surface
The pipes might be hot. Injury may occur from
burns!
▪ Wear protective gloves.
1. Install suitable threaded pipe union.
