Installation and operating instructions Wilo-Para
29
en
• Installation/dismantling must be carried out by a
qualified technician who is trained in the use of the
necessary tools and fixation materials.
• The product must be operated by persons who are
instructed on how the complete system functions.
Definition of “qualified electrician”
A qualified electrician is a person with appropriate techni
-
cal training, knowledge and experience who can identify
and prevent electrical hazards.
Electrical work
• Electrical work must be performed by a qualified elec
-
trician.
• Nationally applicable guidelines, standards and regu
-
lations as well as specifications issued by the local
energy supply companies for connection to the local
power supply system must be observed.
• Before commencing work, disconnect the product
from the mains and safeguard it from being switched
on again.
• The connection must be protected by means of a
residual-current device (RCD).
• The product must be earthed.
• Have defective cables replaced immediately by a
qualified electrician.
• Never open the control module and never remove
control elements.
Operator
responsibilities
• Have all work carried out by qualified personnel only.
• Ensure on-site guard against hot components and
electrical hazards.
• Have defective gaskets and connection pipes
replaced.
This device can be used by children from 8 years of age as
well as by people with reduced physical, sensory or cogni
-
tive capacities or lack of experience and knowledge if they
are supervised or instructed in the safe use of the device
and they understand the dangers that can occur. Children
are not allowed to play with the device. Cleaning and user
maintenance is not allowed to be carried out by children
without supervision.
Summary of Contents for Wilo-Para 15-130/7-50/SC-12/I
