Safety
E:\shares\Baprod\BA\subtec_m\general\us\security.fm
2-5
Warranty
This chapter contains the general information on the warranty. Contractual agreements have the
highest priority and are not superseded by the information in this chapter!
The manufacturer is obliged to correct any defects found in the products it sells, provided that the
following requirements have been fulfilled:
General information
- The defects are caused by the materials used or the way the product was manufactured or
designed.
- The defects were reported in writing to the manufacter within the agreed warranty period.
- The product was used only as prescribed.
- All safety and control devices were connected and inspected by authorized personnel.
Warranty period
If no other provisions have been made, the warranty period applies to the first 12 months after ini-
tial start-up or to a max. of 18 months after the delivery date. Other agreements must be made in
writing in the order confirmation. They will remain valid at least until the agreed warranty period of
the product has expired.
Spare parts, add-ons and
conversions
Only original spare parts as supplied by the manufacturer may be used for repairs, replacements,
add-ons and conversions. Only these parts guarantee a long working life and the highest level of
safety. These parts have been specially designed for our products. Self-made add-ons and conver-
sions or the use of non-original spare parts can seriously damage the product and/or injure person-
nel.
Maintenance
The prescribed maintenance and inspection work should be carried out regularly. This work may
only be carried out by qualified, trained and authorized personnel.
The maintenance and inspec-
tion log supplied must be properly updated
. This enables you to monitor the status of inspections
and maintenance work. Quick repairs not listed in this operation and maintenance manual and all
types of repair work may only be performed by the manufacturer and its authorized service centers.
List of machine operators
The machine operator list
must
be filled out completely. By signing this list, all persons working on
or with the product confirms that they have received, read and understood this operating and
maintenance manual.
Damage to the product
Damage as well as malfunctions that endanger safety must be eliminated immediately by autho-
rized personnel. The product should only be operated if it is in proper working order. During the
agreed warranty period, the product may only be repaired by the manufacturer or an authorized
service workshop! The manufacturer reserves the right to recall the damaged product to the fac-
tory for inspection!
Exclusion from liability
No liability will be assumed for product damage if one or more of the following points applies:
- Incorrect design on our part due to faulty and/or incorrect information provided by the opera-
tor or customer
- Non-compliance with the safety instructions, the regulations and the requirements set forth
by German law and this operating and maintenance manual
- Incorrect storage and transport
- Improper assembly/dismantling
- Improper maintenance
- Unqualified repairs
- Faulty construction site and/or construction work
- Chemical, electrochemical and electrical influences
- Wear
This means the manufacturer’s liability excludes all liability for personal, material or financial injury.
