Ceram C0 data sheet
E:\shares\Baprod\BA\subtec_m\appendix\us\general\c0.fm
D-1
D
Ceram C0 data sheet
General information
WILO products are used for many different pumped liquids and installation sites. We want our coat-
ings to offer an even higher degree of protection against wear and corrosion. For this purpose, we
mainly use our Ceram coatings. However, only an intact coating provides the best possible protec-
tion.
Therefore check the coating after all installation and maintenance work, and repair any minor dam-
age immediately. In the event of major damage, please consult the manufacturer.
Description
Ceram C0 is a sprayable, solvent-free, two-component aluminum-oxide-based coating material
which protects our products from corrosion under particularly harsh mechanical conditions.
Composition
Solvent-free epoxy polymer with solvent-free polyamine hardener and various extenders.
Properties
- A tough, hard and long-lasting coating with high mechanical and chemical resistance and
excellent resistance to abrasion.
- Excellent wet adhesion and compatibility with corrosion protection as a single-layer coating
on steel surfaces.
- Very good adhesion to steel surfaces.
- Replaces coatings containing tar.
- Cost-effective thanks to its durability, low maintenance and easiness to repair.
- Tested by the Federal Waterways Engineering and Research Institute (BAW).
- Solvent-free.
- High-gloss coating when hardened.
Technical data
Density (mixture)
Adhesion / steel
ASTM D 792
ISO 4624
1.4
15
g/cm
3
N/mm
2
Impact resistance / hardness
DIN EN ISO
6272
9
J
Temperature resistance: dry, long-
term
60
°C
Temperature resistance: dry, short-
term
120
°C
Temperature resistance: wet / fluid
Depends on
pumped fluid
Information on
request
°C
Solid content (mixture)
Volume
97
%
Weight
98
%
Table D-1: Technical data
