English
16
Subject to technical alterations!
WILO AG 05/2007
The following menus appear in succession on the pump display:
(horizontal representation of display)
Single pump mode: Setting when first used / Menu order during standard use
LC display
Setting
After switching on the module,
all symbols
appear
on the display for 2 seconds. The current setting
then engages.
Current (basic) setting (factory default):
auto • automatic
night
setback
enabled,
Pump runs in standard mode
e.g.
H 18.0 ft
• present differential pressure
setpoint H
S
= 18.0 ft at same
time ½ H
s
max
(factory setting
depending on pump type)
• Control system
Δ
p-v
The differential pressure set point can
be altered by turning the tuning button.
The new differential pressure set point
blinks.
The new setting is stored by pressing
the button briefly.
If no button is pressed, the previously
set blinking differential pressure set
point returns to the previous value after
30 seconds.
Press tuning button for > 1 second.
The next menu point
appears.
If no setting is made in the subsequent menus for 30s,
the basic setting
re-appears in the display.
Summary of Contents for Stratos-D
Page 2: ...Fig 1 Fig 2 1 1 2 1 3 1 1 2 Fig 3...
Page 4: ...Fig 9 Fig 10 max min Off U V 1 2 3 10...
Page 6: ...6...
Page 97: ......
