Installation and operating instructions Wilo-Stratos
19
English
Double pump mode (as two single pump mode): Setting when starting up for
the first time
(vertical display)
LC display
Setting
When the module is switched on
all symbols
appear in the display for 2 seconds. Menu
then
appears.
The symbol
MA
= Master blinks on the display of
both pumps.
Should the settings not be altered, both pumps will
run at a constant speed (H
S
= ½ H
max.
where
Q = 0).
By
on the master pump tuning button the
setting mode menu
appears on the display.
SL
= Slave appears automatically on the slave
pump display.
The configuration: left pump Master, right pump
Slave is thus selected. The tuning button on the
slave pump is deactivated. No more settings can be
made here.
A position setting for the display cannot be made
on the slave pump. Position setting on the slave
pump is taken over from the settings of the master
pump.
Summary of Contents for Stratos-D
Page 2: ...Fig 1 Fig 2 1 1 2 1 3 1 1 2 Fig 3...
Page 4: ...Fig 9 Fig 10 max min Off U V 1 2 3 10...
Page 6: ...6...
Page 97: ......
