en
Spare parts
44
WILO SE 2019-01
4. Incorrect direction of rotation.
⇒ Have the connection corrected by a qualified electrician.
5. Signs of wear on propeller.
⇒ Inspect propeller and replace if necessary.
6. Motor bearings have worn.
⇒ Inform customer service; send the mixer back to the factory for recondition-
ing.
Further steps for troubleshooting
If the points listed here do not rectify the fault, contact customer service. Customer
service can assist in the following ways:
ƒ
Telephone or written support.
ƒ
On-site support.
ƒ
Inspection and repair at the factory.
Costs may be incurred if you request customer services! Please contact customer ser-
vices for more information.
11
Spare parts
Spare parts are ordered via customer service. To avoid return queries and incorrect or-
ders, the serial or article number must always be supplied.
Subject to change without
prior notice!
12
Disposal
12.1
Oils and lubricants
Operating fluid must be collected in suitable tanks and disposed of in accordance with
the locally applicable guidelines.
12.2
Protective clothing
Used protective clothing must be disposed of in accordance with the locally applicable
guidelines.
12.3
Information on the collection of
used electrical and electronic
products
Proper disposal and appropriate recycling of this product prevents damage to the envi-
ronment and danger to your personal health.
NOTICE
Disposal in domestic waste is forbidden!
In the European Union, this symbol can appear on the product, the packaging or the
accompanying documentation. It means that the electrical and electronic products
in question must not be disposed of along with domestic waste.
To ensure proper handling, recycling and disposal of the used products in question,
please note the following points:
ƒ
Only hand over these products at designated, certified collecting points.
ƒ
Observe the locally applicable regulations!
Please consult your local municipality, the nearest waste disposal site, or the dealer who
sold the product to you for information on proper disposal. Further recycling informa-
tion can be found at www.wilo-recycling.com.
13
Appendix
13.1
Tightening torques
Rust-free screws A2/A4
Threaded
Tightening torque
Nm
kp m
ft·lb
M5
5.5
0.56
4
M6
7.5
0.76
5.5
M8
18.5
1.89
13.5
M10
37
3.77
27.5
