2
SPECIFICATIONS
Figure 1 - Typical Single Acting Cylinder Components
Carry Handle
Saddle
Cylinder
Housing
Female Coupler,
3/8”-18NPTF
Dust Cover
Model Number
Cylinder
Capacity
(tons)
Stroke
(in)
Cylinder
Effective
Area
(in
2
)
Oil
Capacity
(in
3
)
Collapsed
Height
(in)
Extended
Height
(in)
Cylinder
Housing
Diameter
(in)
Weight
(lb)
Internal
Pressure at
Capacity
(psi)
6CA30T02
30
2
6.5
13
6.5
8.5
4.5
11
9,231
6CA30T04
4
26
8.5
12.5
14
6CA30T06
6
39
10.5
16.5
17
6CA50T02
50
2
11
22
6.5
8.5
5.5
17
9,091
6CA50T04
4
44
8.5
12.5
21
6CA50T06
6
66
10.5
16.5
25
6CA50T10
10
110
14.5
24.5
34
6CA75T04
75
4
15
60
8.5
12.5
6.5
29
10,000
6CA75T06
6
90
10.5
16.5
35
6CA100T02
100
2
20.7
41
6.5
8.5
8
36
9,662
6CA100T04
4
83
8.5
12.5
43
6CA100T06
6
124
10.5
16.5
51
6CA100T10
10
207
14.5
24.5
68
Save these instructions.
For your safety, read and
understand the information contained within. The owner
and operator shall have an understanding of this product
and safe operating procedures before attempting to use
this product. Instructions and safety information shall be
conveyed in the operator’s native language before use of
this product is authorized. Make certain that the operator
thoroughly understands the inherent dangers associated
with the use and misuse of the product. If any doubt exists
as to the safe and proper use of this product as outlined
in this factory authorized manual, remove from service
immediately.
!
!
!
Inspect before each use.
Do not use if leaking, broken,
bent, cracked or otherwise damaged parts are noted. If the
cylinder has been or suspected to have been subjected
to a shock load (a load dropped suddenly, unexpectedly
upon it), discontinue use until checked out by a Williams
authorized service center. Owners and operators of this
equipment shall be aware that the use and subsequent
repair of this equipment may require special training and
knowledge. It is recommended that an annual inspection
be done by qualified personnel and that any missing or
damaged parts, decals, warning/safety labels or signs be
replaced with Williams authorized replacement parts only.
Any cylinder that appears to be damaged in any way, is
worn or operates abnormally shall be removed from service
immediately until such time as repairs can be made.
PRODUCT DESCRIPTION
Williams Single Acting Cylinder is designed for rated
capacity pushing, spreading and pressing jobs. A wide
variety of applications exist for this category of product.
Special skill, knowledge and training may be required for
a specific task and the product may not be suitable for all
the jobs described above.
NEVER
use hydraulic cylinder as a support device!
Always check connections before using. Alteration of these
products is strictly prohibited. Use only those adapters and
attachments provided and approved by the manufacturer.
WARNING
: To reduce the risk of personal injury and/
or property damage, ensure that the rated working pressure of
each pressurized attachment be equal to or greater than the rated
working pressure developed by the hydraulic pump.
Unsuitable applications would include applications that call for
a device to move, level or support persons, animals, hazardous
materials, mobile homes/dwellings in general, mirrors and/or plate
glass, and/or to connect/secure hatches, components, etc. between
bulkheads. The user ultimately must make the decision regarding
suitability of the product for any given task and therefore accept
responsibility for that decision. I
mmediately
after lifting, loads must
be supported by appropriate mechanical means.
PRODUCT DESCRIPTION
(continued)
