background image

Williams Sound 

®

Helping People Hear

13

Your new TeleTalker product has been registered
with the Federal Communications Commission
(FCC). This product complies with standards in Part
68 of the FCC Rules. The FCC requires us to
provide you with the following information:

1.

Connection and use with the nationwide
telephone network

The FCC requires that you connect your
product to the nationwide telephone network
through a modular telephone outlet or jack.
The modular telephone outlet or jack to which
the telephone must be connected is a USOC
RJ-11C or RJ-11W.

This equipment may not be used with Party
Line Service or with Coin Telephone Lines.

2.

Notification to the telephone company

The FCC requires that upon request of your
local telephone company, you provide the
following information:

A. The ‘line’ to which you will connect the

telephone equipment ( your phone number).

B. The telephone equipment’s FCC registra-

tion number and Ringer Equivalence
Number (REN). These numbers are on the
back or bottom of your telephone equip-
ment.

The REN is useful to determine how many
devices you may connect to your telephone
line and still have them ring when your tele-
phone line is called. In most, but not all areas,
the sum of all REN’s should be 5 or less. You
may want to contact your local telephone
company if you experience problems.

3.

Repair instructions

If it is determined that your telephone equip-
ment is malfunctioning, the FCC requires that
it not be used and that it be unplugged from
the modular outlet until the problem has been
corrected. Repairs to this telephone equipment
can only be made by the manufacturer or its
authorized agents or by others who may be
authorized by the FCC. For repair procedures,

FCC Registration Notice

follow the instructions under the section
entitled Warranty.

4.

Rights of the telephone company

If your product is causing harm to the tele-
phone network, the telephone company may
temporarily discontinue your telephone
service. If possible, they will notify you before
they interrupt service. If advance notice isn’t
practical, you’ll be notified as soon as
possible. You’ll be given the opportunity to
correct the problem, and you’ll be informed of
your right to file a complaint with the FCC.

Your telephone company may make changes
in its facilities, equipment, operations, or
procedures that could effect the proper func-
tioning of your TeleTalker product. If such
changes are planned, you’ll be notified.

5.

This telephone is compatible with inductive-
ly coupled (Telecoil) hearing aids.

Summary of Contents for TEL 004
















Reviews: