4
Blue POD
4. Do Not Touch any part of the BluePOD system with wet hands. Do not handle any part of BluePOD system, including the power
cord, when your hands are wet or damp. If water or any other liquid enters the BluePOD system’s or system’s location, take the full
BluePOD system to qualified service personnel for inspection.
5. Place all components of the BluePOD system in a well ventilated location. Take special care to provide plenty of ventilation on all
sides of the BluePOD system components, especially when it is placed in a small location, such as a rack. If ventilation is blocked,
the BluePOD system may over heat and malfunction.
6. Do not expose the BluePOD system to direct sun light or heating units as the BluePOD system’s internal components temperature
may rise and shorten the life of the components. Avoid damp and dusty places.
7. Care – From time to time you should wipe off the front and side panels and the cabinet with a soft cloth. Do not use rough
material, thinners, alcohol or other chemical solvents or cloths since this may damage the finish or remove the panel
graphics.
Recycling Instructions
Help Williams AV protect the environment. Please take the time to dispose of your equipment properly.
Product Recycling for Customers in the European Union:
Please do NOT dispose of your equipment in the household trash. Take the equipment to a electronics recycling center, or
return the product to the factory for proper disposal.
Appearance Differences
Some versions of the BluePOD may have differences in appearance. These appearance changes do not affect functionality.
Figure 1: The Rear of the BluePOD Controller with Bluetooth POD Port
Note: Instead of Bluetooth POD, most models have the label B-WAP� This is only a change in labeling�
Figure 2: Alternative, larger B-WAP model
