6
EN
Control panel
1. Thermostat and output selector:
i.
to the right to increase the temperature.
ii. Push the button to change the desired power level. 3 power levels.
2. Fan ON/OFF
3. ON/OFF button
4. Power indicator — Shows whether the heater is using power or not
5. Indicates the output level
6. Indicates whether the fan is activated
7. Desired room temperature
WARNING!
BE SURE THE FOOT IS FITTED CORRECTLY AND ACCORDING TO THE
INSTRUCTIONS BEFORE USING THE HEATER!
Instructions electronic thermostat
Please see table on page 4 for which models that have electronic thermostats.
ATTENTION! This heater is only meant to be used as a supplementary heating
source, and must not be used without supervision
1. Set the output selector to the OFF position (0) and the thermostat to minimum.
Plug the heater into a grounded outlet.
2. Set the output selector to position |, || or |||. Turn the thermostat up to the maximum
position. When the desired room temperature has been reached, turn the
thermostat slowly down until you hear a click. The thermostat can now remain in
s soon as the room
temperature falls below this level, the heater will automatically switch on again.
When the room has again reached the desired temperature, the heater will switch
3. If you wish to change the room temperature, repeat the instructions in step 2.
4.
become extremely hot.
5.
Usage mechanical thermostat
